Plastic abrasive media supplier is defined as a less offensive media than most other abrasives making it ideally changed for blasting on smoother substrates and generally used for the deflashing of plastic elements, mold cleaning, the removal and washing of anti-corrosion coatings, hydrocarbon deposits, waxes, adhesives, and sealants. High stability, Free of Silica, no residual coats results in a highly effective cost-effective media supply. Plastic abrasive media supplier are prepared in a variety of types that give quick stripping rates and steady performance. This media is perfect for removing layers and design from substrates, including aluminum and other delicate metals, composites, and plastics. The relative softness of plastic abrasive media makes it ideal for automotive and aerospace blasting purposes. Type II Urea is the most adaptable plastic category and is proper for a broad range of washing and stripping purposes. Type III Melamine is the common aggressive plastic abrasive media supplier form and works great on steel and hard substrates.
There are two basic varieties of plastic media: urea-methanal and resin-bonded polyester. Urea-methanal is the more sensitive of the two kinds and is considered as artificial media that can produce a clear, reflective finish on elements that will not support an extra electroplating step as part of the finishing method.
Resin-bonded polyester produces a softer surface and results in very good anodizing, which increases the width of the oxide layer on the cover of the substrate.
Plastic abrasive media is now the preferred option for paint stripping purposes in the automotive industry. Most plastic media are more active than paint but softer than the thin standard sheet metals used to make automotive parts such as hoods, fenders, and frames. Thus, the plastic media blasting method will cut, shear and rear the varnish externally breaking the part surface.
And since plastic media blasting is a dry method, there is no extra flash rust and no cares about warping or pitting.
Whether your demands call for plastic part deflashing, stripping, or cleaning, Finishing Systems has the correct synthetic blast media for the job. Our contributions include Type-2 Urea, Type-3 Melamine, and Type-5 Acrylic organizations. Each has its advantages and benefits for the proper purpose. Please consult us for details. Finishing Methods carry a large collection of polycarbonate, polyamide, and polystyrene synthetic media for many different purposes. Media is available in several particle sizes and a wide range of hardness and density ranges to ensure you achieve the specific results you desire.
We offer an abrasive shot, Steel Shot, SS Shot, Steel Grit, Garnet sand, Quartz shot, Aluminum oxide, glass beads blasting for stainless steel, etc, and a qualitative range of industrial steel abrasive products.
